Brake Fluid
Exchanger -
BFX 200
Automated push/pull
process completely
flushes the entire brake
system and provides
superior service.
Brake fluid
exchanges are
recommended as
routine maintenance
by a growing number
of OEM’s. The BFX
200 performs this
profitable service
efficiently and
accurately –
increasing shop
revenue and customer
satisfaction.
The BFX 200’s can
perform a complete
brake fluid flush in
3 simple steps – all
in less than 10
minutes on average!
First extract the
old fluid from the
master cylinder.
Second, refill the
master cylinder with
new fluid. Third,
the BFX 200
automatically
performs the OEM
specified single
sequential wheel-end
bleeding.
-
Color-coded
wheel-end connectors eliminate hook-up
confusion and store conveniently
-
Universal
adaptors for a wide variety of master
cylinders
-
New brake fluid
container
-
Rugged steel
construction with special powder coating to
resist brake fluid for long life
-
Easy access
on-board waste brake fluid container
-
Foam filled
maintenance free tires
-
Efficient and
simple 3-step process
-
User-friendly
operation
-
Unique
push/pull process ensures optimal fluid
exchange, eliminates system contamination,
purges harmful air simultaneously
-
Isolates each
wheel end and performs OEM recommended
bleeding sequences — as programmed by
technician.
-
Compatible with
non-ABS and ABS systems
-
No electrical
power outlet needed — operates from 12 V
vehicle battery
-
TechALERT®
compatible — increases technician efficiency
-
EPDM rubber
hoses are compatible with brake fluids
Bosch
Brake Fluid
Exchanger Brochure,
click
here
Automatic Transmission Fluid Exchanger - ATX 200
The fully automatic
ATX 200 can quickly, accurately and thoroughly
service a vehicle’s automatic transmission fluid
in minutes, while exchanging more than 90% of
the fluid. Simply program the fluid amount you
wish to exchange, press the start button and
walk away. The machine will automatically begin
the exchange process; with audible and visual
alerts when exchange is complete
-
Adaptor set for
most transmission cooler lines increases
number of potential services
-
Tech-friendly,
easy-to-use keypad
-
Sight glasses
for new fluid and old fluid assist in
monitoring the service
-
Rugged steel
construction for long life
-
Foam filled
maintenance free tires
-
Suction “Boost”
pump decreases time of servicing low-flow or
temperature controlled transmissions
-
Technician can
precisely adjust transmission fluid level by
adding or draining in ½ quart increments
during the service
-
High volume
pump allows extremely fast (2-5 minutes
average) service times
-
Comprehensive
transmission cooler line adaptors means
being able to service more vehicles
-
Digital weight
scale technology for precise fluid flow
measurement and accurate fluid exchange
-
Proportional
motor control maximizes exchange percentage
-
Transmission
diagnostic pressure gauge
-
Fluid flow
direction indicator verifies correct hook-up
-
Patented bypass
circuit for vehicle protection if power is
interrupted
Bosch
Automatic
Transmission Fluid Exchanger Brochure,
click
here
Automatic Transmission Fluid Exchanger - ATX 300
The fully automatic
ATX 300 can quickly, accurately and thoroughly
service a vehicle’s automatic transmission fluid
in 2-5 minutes, while exchanging more than 90%
of the fluid in the cooler mode. Simply program
the fluid amount you wish to exchange, press the
start button and walk away. The machine will
automatically begin the exchange process. The
ATX 300 also offers a dipstick exchange mode,
making the ATX 300 one of the most versatile
automatic transmission fluid exchange machines
in the market!
-
Adaptor set for
most transmission cooler lines increases
number of potential services
-
Tech-friendly,
easy-to-use keypad
-
Sight glasses
for new fluid and old fluid assist in
monitoring the service
-
Rugged steel
construction for long life
-
Foam filled
maintenance free tires
-
Suction “Boost”
pump decreases time of servicing low-flow or
temperature controlled transmissions
-
Technician can
precisely adjust transmission fluid level by
adding or draining in ½ quart increments
during the service
-
High volume
pump allows extremely fast (2-5 minutes
average) service times*
-
Comprehensive
transmission cooler line adaptors means
being able to service more vehicles
-
Digital weight
scale technology for precise fluid flow
measurement and accurate fluid exchange
-
Proportional
motor control maximizes exchange percentage
-
Transmission
diagnostic pressure gauge
-
Fluid flow
direction indicator verifies correct hook-up
-
Patented bypass
circuit for vehicle protection if power is
interrupted
Bosch
Automatic
Transmission Fluid
Exchanger Brochure,
click
here
Differential Fluid
Exchanger - DFX 100
Differential and
manual transmission fluid exchange service is
now simple and mess-free with the DFX 100! The
DFX 100 performs this service efficiently and
accurately. The DFX 100 can perform a complete
differential fluid exchange in 10-15 minutes
average! The clear dual process hose saves time
by only having one wand to insert into the
differential or transmission. Simply insert the
wand, power the unit up to extract the old
fluid, then refill with new fluid, until the
waste fluid matches the color of the new fluid.
-
Simple to
operate by toggling the new and old fluid
switches
-
New and used
power differential fluid containers
-
Clear dual
process hose saves time and allows visual
monitoring of the service
-
Rugged cart has
small footprint, saving valuable shop floor
space
-
Storage shelf
-
Four heavy duty
swivel casters
-
High-capacity
waste pump provides enhanced cold
temperature fluid extraction
-
Extremely fast
process times from the two
positive-displacement diaphragm pumps
-
No priming
required
-
User-friendly
operation
-
Powerful 120V
AC pump moves heavy gear oil
-
Compatible with
all gear oils, including synthetic
Bosch
Differential Fluid
Exchanger Brochure,
click
here
Power Steering Fluid Exchanger - PSX 300
The PSX 300
performs this service efficiently and
accurately. The PSX 300 can perform a complete
power steering fluid exchange in 5-15 minutes
average! The clear dual process hose saves time
by only having one wand to insert into the power
steering reservoir. Simply insert the wand into
the reservoir, power the unit up to extract the
old fluid, then refill the reservoir with new
fluid, and turn the steering wheel lock-to-lock
until the waste fluid matches the color of the
new fluid.
-
Simple to
operate by toggling the new and old fluid
switches
-
New and used
power steering fluid containers
-
Clear dual
process hose saves time and allows visual
monitoring of the service
-
Rugged cart has
small footprint, saving valuable shop floor
space
-
Storage shelf
-
Four heavy duty
swivel casters
-
High-capacity
waste pump provides enhanced cold
temperature fluid extraction
-
Extremely fast
process times from the two
positive-displacement diaphragm pumps
-
No priming
required
-
User-friendly
operation
-
Compatible with
multiple power steering fluid types
-
Available
without cart as an add-on installation to
the ATX 200
Bosch
Power Steering Fluid
Exchanger Brochure,
click
here
Vacuum Coolant Exchanger - VCX 100
The VCX 100 can
quickly and easily exchange up to 60% of a
vehicle’s engine coolant in 5-15 minutes on
average. The VCX 100 can exchange all types of
engine coolant. The versatile cone adapter is
adaptable to most vehicle makes and models.
Using shop air, the vacuum extraction and
pressure fill process provides rapid process
times – perfect for fast-lube shops
-
(1) new and (1)
used 20 quart coolant cylinders with no-leak
end cap design
-
New fluid and
old fluid levels are visible – assisting in
selling the service to customers
-
Tech-friendly,
easy-to-use ball valve controls
-
Rugged
construction withstands shop environment
-
Foam-filled
rear tires are maintenance free
-
Exchanges all
coolant types, with easy coolant changeover
-
Unique cylinder
design allows customer to see the old, dirty
fluid being extracted and replaced with new
fluid – making the service easier to sell!
-
Quick and easy
exchange – cone adapter inserts into
radiator spout or pressurized overflow tank
-
Versatile cone
adapter means being able to service more
vehicles
-
Up to 60%
average single-pass exchange percentage most
vehicles
-
Fast total
service time (5-15 minutes average)*
-
Includes (1) 20
quart new coolant cylinder, (1) 20 quart
waste cylinder
-
High-strength
fiberglass composite coolant cylinders,
rugged chassis and wire reinforced hoses are
designed for harsh shop environments
Bosch
Vacuum Coolant
Exchanger Brochure,
click
here
Vacuum Coolant Exchanger - VCX 400
The VCX 400 can
quickly and easily exchange up to 60% of a
vehicle’s engine coolant in 5-15 minutes* on
average. The VCX 400 can exchange all types of
engine coolant. The VCX 400 features 3 new
coolant cylinders – coolant selection and
changeover is simple! The versatile cone adapter
is adaptable to most vehicle makes and models.
Using shop air, the vacuum extraction and
pressure fill process provides rapid process
times – perfect for fast-lube shops!
-
(3) new and (1)
used 20 quart coolant cylinders with no-leak
end cap design
-
New fluid and
old fluid levels are visible – assisting in
selling the service to customers
-
Tech-friendly,
easy-to-use ball valve controls
-
Rugged
construction withstands shop environment
-
Foam-filled
rear tires are maintenance free
-
Exchanges all
coolant types, with easy coolant selection /
changeover
-
Unique cylinder
design allows customer to see the old, dirty
fluid being extracted and replaced with new
fluid – making the service easier to sell!
-
Quick and easy
exchange – cone adapter inserts into
radiator spout or pressurized overflow tank
-
Versatile cone
adapter means being able to service more
vehicles
-
Up to 60%
average single-pass exchange percentage most
vehicles
-
Fast total
service time (5-15 minutes average)*
-
Includes (3) 20
quart new coolant cylinder, (1) 20 quart
waste cylinder
-
High-strength
fiberglass composite coolant cylinders,
rugged chassis and wire reinforced hoses are
designed for harsh shop environments
Bosch
Vacuum Coolant
Exchanger Brochure,
click
here
Multi Coolant System Exchanger - MCX 200
The MCX 200 can
quickly, accurately and thoroughly exchange a
vehicle’s engine coolant in less than 3 minutes*
on average, while exchanging 92 to 98% of the
coolant in a single pass! The MCX 200 can
exchange all types of engine coolant, has a
system pressure test feature, and a “hot car”
radiator cap pressure release function. The MCX
200 also uses a pressure switch to protect
vehicle cooling systems from high pressure.
-
Convenient
storage for step adapters and adapter hoses
-
Tech-friendly,
easy-to-use controls
-
Rugged steel
construction for long life
-
New fluid and
old fluid levels are visible from the front
to assist in monitoring the service
-
Four casters
make the MCX 200 easy to move around the
shop
-
Exchanges all
coolant types
-
True, thorough
exchange – machine hooks into radiator /
hoses
-
92-98% single
pass, average exchange percentage most
vehicles
-
Extremely fast
(less than 3 minutes average) service time
-
Cooling system
pressure test function
-
“Hot car”
radiator cap pressure release feature
-
Extensive
coolant adapters means being able to service
more vehicles
-
Includes (2)
7.5 gal new coolant tanks, (1) 15 gal waste
tank
-
Pressure switch
protects vehicle cooling systems from high
pressure
-
Four casters
make it easy to move the MCX 200 around in a
crowded shop
Bosch
Multi Coolant System
Exchanger Brochure,
click
here
.jpg)
.jpg)
3.jpg)