|
RTP9 - 9,000 lbs. capacity Two-Post Lift
RTP9 Features:
- 9,000 lbs. capacity lift for facilities with low ceilings
- Dual
hydraulic cylinders with chains
- Carriage
latch system engages every 3"
- Secondary
lock system includes a spring actuated slack
chain locking device
- Truck
adapters included
- ALI Certified,
click
here for more information
RTP9 Specifications:
|
Capacity |
9,000 lbs. |
|
Rise w/ Extensions |
80-1/2" |
|
Rise w/out Extensions |
72" |
|
Overall Height |
111-1/4" |
|
Overall Width |
138-1/2" |
|
Drive Through Clearance |
97-1/4" |
|
Width Inside Columns |
111" |
|
Arm Reach (Min/Max) |
30" / 46-1/4" |
|
Min. Adapter Height |
3-1/2" |
|
Driver-Over Height |
1-1/2" |
|
Voltage/Amps |
208/230, 20 Amps |
|
Motor |
2 HP |
|
Min. Ceiling Height |
113" (9'-5") |
|
RTP10 - 10,000 lbs. capacity Two-Post lift
RTP10 Features:
- Overhead
padded switch bar to avoid vehicle damage from being raised
too high
- Position
vehicle doors in front of or behind columns to avoid door
damage
- Top mounted
pull design hydraulic cylinder. The piston rod is protected
behind the carriage to prevent damage
- Automatic arm
restraint gears
- Re-setting
safety locks in each column
- Two
full-stroke cylinders with overhead cable for equalization
- Truck
adapters included
- ALI Certified,
click
here for more information
RTP10 Specifications:
|
Capacity |
10,000 lbs. |
|
Rise |
77" |
|
Overall Height |
143-1/8" |
|
Overall Width |
133" |
|
Drive Through
Clearance |
99" |
|
Overhead Switch Height |
136-1/4" |
|
Front Arm Reach
(Min/Max) |
26-1/8" / 44-1/2" |
|
Rear Arm Reach (Min/Max) |
38-7/8" / 58" |
|
Min. Adapter Height |
3-5/8" |
|
Width Inside Columns |
111-3/4" |
|
Voltage/Amps |
208/230, 20 Amps |
|
Motor |
2 HP |
|
Min. Ceiling Height |
144-1/8" (12'1/8") |
|
.jpg
)
1.jpg)
